《小型磁力传动离心泵》标准，过流部件采用聚苯硫醚 (PPS) ，不受大多数酸、碱、盐的侵蚀 ( 除氧化性酸如浓硫酸、硝酸和王水等 ) ，其性能接近于聚四氟乙烯的化学性能，在 100 ℃以下能耐大多数有机溶剂，特别能耐汽油和甲醇的混和液，是酸碱工业中的理想用泵。 MPH type plastic magnetic pump meets the standard of "small-scale magnetic transmission centrifugal pump". The over-current parts are made of polyphenylene sulfide (PPS) , which is not affected by most acids, alkalis and salts ( except for oxidizing acids such as concentrated sulfuric acid, nitric acid and king Water, etc. ) , whose performance is close to the chemical properties of polytetrafluoroethylene. It is resistant to most organic solvents below 100 ℃, especially resistant to the mixed liquid of gasoline and methanol. It is an ideal pump in the acid and alkali industry.
运转是在连轴上和叶轮上分别装配有磁性材料而互相吸引偶合，无需配以传统机械轴承，因而是完全密封的。 The MPH type plastic magnetic pump is equipped with magnetic materials on the coupling shaft and impeller to attract and couple each other. It does not need to be equipped with traditional mechanical bearings, so it is completely sealed. The rotating torque of the motor drives the blades to work through the attraction of active and driven magnetism. The great disadvantage of the conventional magnetic drive pump is that it is absolutely forbidden to run under the condition of liquid shortage, otherwise the whole machine will be destroyed, which will cause unnecessary trouble and annoyance to the user. Shanghai Chaole's magnetic pump does not need to be careful about this. It adopts a specially designed special formula ceramic as the bearing, which has strong abrasion resistance and corrosion resistance, so that its advancedness and safety performance can be reliably guaranteed. The magnetic drive circulating pump adopts a shaftless seal design, which completely avoids the defect of post-corrosion pollution caused by liquid leakage in traditional mechanical shaft seal pumps, and is the most ideal liquid delivery pump in industrial equipment.
2.8 ～ 230L/min 扬程： 0.8 ～ 32 米 功率： 3 ～ 2200W 使用温度： 0 ～ 60 ℃ Maximum flow rate: 2.8 to 230L / min Head: 0.8 to 32 meters Power: 3 to 2200W Operating temperature: 0 to 60 ℃
| 产品特点 ■ Product Features |
MPH type plastic magnetic pump is in accordance with JB / T 7742-1995 "Small Magnetic Transmission Centrifugal Pump" standard. The overcurrent parts are made of polyphenylene sulfide (PPS), which is not affected by most acids, alkalis and salts (except for oxidizing acids such as Concentrated sulfuric acid, nitric acid, aqua regia, etc.), its performance is close to the chemical properties of polytetrafluoroethylene, and it can resist most organic solvents below 100 ℃, especially resistant to the mixed liquid of gasoline and methanol. .
型号意义 ■ Model meaning
| 性能曲线 ■ Performance curve |
| 性能参数 ■ Performance parameters |
Magnetic Pump Related Technical Articles